Seagate FireCuda Forge hands-on: a hybrid drive where you bring your own SSD

Started by AlexaBliss, Today at 09:30 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Topic: Seagate FireCuda Forge hands-on: a hybrid drive where you bring your own SSD   Views(Read 13 times)
Active members in this topic:
AlexaBliss(1)

AlexaBliss

Seagate has revived the idea of a hybrid hard drive with a twist. Tom's Hardware has gone hands on with the FireCuda Forge, an external drive in 8TB and 20TB sizes priced at $699 and $899, which will not work until you install your own M.2 2280 SSD in a side bay

Installing the SSD takes four screws and your own Phillips screwdriver. Seagate recommends 1TB SSDs with DRAM, and qualified drives include the Samsung 990 Pro, WD and SanDisk SN850X and GX Pro 850X, and SN710 and GX7100, though speed is capped at PCIe Gen3 class levels

Seagate's Alkemi tiering keeps frequently used data on the SSD while the hard drive holds everything. Seagate describes it as machine learning rather than generative AI, and it works like the hybrid drives of the 2010s but with up to 1TB of cache

The drive uses USB4, rated at up to 2,500MB per second for reads and 2,000MB per second for writes, and needs an external power brick plus a USB-C cable. It appears as a single drive in Windows 11 and on macOS 26 and later, and early tests show strong reads but writes behind SanDisk's Desk Drive, with only plastic and foil to cool the SSD bay

Combining big hard drive capacity with SSD speed for frequently used files is an appealing idea for photographers and video editors. Letting buyers choose their own SSD keeps flexibility, although it adds cost and effort. Cooling for the SSD bay is worth keeping an eye on during long transfers

Would you buy a hybrid external drive like this? And how do you store large photo and video libraries?

I'm not always right, but I'm never wrong ;)