ASRock posts VBIOS 1.0.6 after 1.0.5 left some RX 7900 cards unable to boot

Started by Protocol90, Today at 01:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Topic: ASRock posts VBIOS 1.0.6 after 1.0.5 left some RX 7900 cards unable to boot   Views(Read 36 times)
Active members in this topic:
Protocol90(1)

Protocol90

ASRock has released a new graphics card firmware after its previous version caused serious problems. Tom's Hardware reports that VBIOS 1.0.5 was listed for ten models across the RX 7600 XT, 7700 XT, 7800 XT, 7900 XT and 7900 XTX

Some RX 7900 XT and XTX cards failed to boot after updating. A few owners recovered them using external EEPROM programmers

ASRock pulled version 1.0.5 and has now posted 1.0.6, but it has not explained the failures or said whether the new version fixes them. There is no changelog

Warranty handling has been inconsistent, with a Japanese owner told the failure is covered while an out of warranty European owner was turned away. The reports come from the community, via ComputerBase and VideoCardz, so it is not clear whether 1.0.6 is safe

Graphics card firmware updates are rarely needed, so waiting until there is clear information is the safest choice. Bricked cards are a nightmare for owners, especially without warranty. ASRock should explain what went wrong and support everyone affected

Do you update your graphics card's firmware? And should manufacturers cover cards bricked by their own updates?