Contractor turns a Milwaukee Hackzall into a fast Cat6 cable untwister

Started by SignalMage92, Today at 02:48 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Topic: Contractor turns a Milwaukee Hackzall into a fast Cat6 cable untwister   Views(Read 22 times)
Active members in this topic:
SignalMage92(1) Amber81(1)

SignalMage92

A contractor facing a huge cabling job built his own time saving tool. Tom's Hardware reports that the job needed about 50,000 Cat6 cables, roughly 100,000 terminations

He first modified a $500 Alibaba wire straightening machine, adding a DeWalt battery and a bike pump, but it was too bulky. The final tool uses a Milwaukee Hackzall saw with 3D printed parts, laser cut metal and a toggle clamp

It untwists copper clad aluminium cable in under two seconds. Solid copper cable still has to be done pair by pair

The article estimates about 30 seconds saved per cable end, which could mean more than 830 hours on a large job. The builder is YouTuber Analytical Horsepower, and the hours figure is an estimate

Turning a reciprocating saw into an untwisting machine is the kind of practical thinking that makes great DIY. Saving hundreds of hours on a big job shows how valuable custom tools can be. Anyone who has terminated Cat6 by hand will appreciate this

Have you ever built a custom tool for a big job? And how many Cat6 cables have you terminated by hand?


Amber81

Eight hundred and thirty hours saved is a guess, but plausible. Even half that is impressive. Weeks of labour avoided. Great payback. Clever work
Schrodinger's bug: works & broken at the same time